Відео

I've never tried so I just did an online search and I didn't find any indication it will help. Have you tried vinegar and water mixed at about a 4:1 ratio? I've had pretty good success with that but it's not a permanent solution. The weeds eventually come back. One method I like (but only because fire is fun) is using a propane torch. Not one of those small canisters but the hose you attach to a 20-lb can. Since its a gravel drive it should be a simple matter and because it's such a large area you need to do might be the most time effective. I'll say the weeds come back from that too but they seem to stay dead a bit longer. Sadly, Roundup and similar products are the most effective solution.

Ask and ye shall receive...ua-cam.com/video/XtMLI-I9P-0/v-deo.html

lol it can be so frustrating. I'm guessing you are talking about the inlet and outlet hoses into the filter. To be honest, I haven't touched them since I installed it 10 years ago however IIRC, you push in the outer ring where the tube goes in and then pull on the hose. At the 2:45 mark in the video you can see the connection. The part right where the tube enters into the tube I believe you push that in. As I said, it's been a long time since I've done it. Good luck!

FWIW I just looked for the manual for the unit online and Whirlpool's manual doesn't even show the hose connections. It shows it hardwired to the house plumbing with outdoor hose bibb connections. If I come across my manual and it shows how I'll post it here, but I do believe my original instructions are correct or at least close to what you have to do

Found the instructions! A little worse for the wear but it is as I said. You push in the outer ring, the collet, and while pushing it in, you pull out the hose. That releases the tubing. Hope that helps.

Growing like a weed. It's almost as tall as it was before I pollarded it. The more I trim it the wilder it grows. Lol!

Don't you fitness shame me! lol You will listen to my wheezing and like it!

It will take successive sprayings. This is an ongoing battle I have every year with my grapes. It seems if I delay spraying them for even a little I see bunches of grapes start developing black rot. I even considered just digging up my vines this year (I didn't). I think spraying every two weeks, especially after a rain can help save them. This is definitely not a once and done.

@@HomesteadDIY thanks for the info..

They came with it!

@@HomesteadDIY Thanks, but, I got mine 2nd hand so - no extra parts... thought you might have ordered them

@@JohnCausey-pe2gw I just checked the Harbor Freight website. They offer the blades as a replacement part though it says call for pricing. I see Amazon sells blades that look pretty similar for about $10 or so.

You're welcome!

Regular 15 amp breaker. Also, if you watch the video I show to to change or replace the blades. Well worth watching because there are some unique points about the blades.

You’re welcome! Glad it helped. Cheers!

That's possible though it would make them heavy af to carry

Lol I thought of the same thing .. but like he said , wouldn't be mobile anymore lol . unless you're in a wheel chair carrying them lol ..

they worked just fine with the Infiniti G37 which has a very low front end

Lol! Guilty as charged. I suck at it!

I’m getting another set this week. I cracked a spot when I almost drove over the edge. I think they would have been fine but I figured for $60 it wasn’t worth risking my life

@@gardengrowngroceries With all those crevices just fill them with high strength concrete

It might be better but I didn't bother. If you have a lot of potato plants it becomes impractical to do that. If you have just a couple though it couldn't hurt

No! One of their more annoying features :)

I guess you can just buy everything instead of trying to do things yourself. Some people have more time than money available to them...hence the name, poor man's fiberglass

Yellow leaves could be a number of things including Mosaic virus. The small holes could be flea beetles. But without a picture it's hard to say

Surprisingly well! I've had to recover the top a few times because hurricanes ripped the plastic to shreds but otherwise it's provided an excellent place to start seeds

It works but my concern is the pressure will build up and burst the hose so I typically try not to allow that to occur for too long. Even with some stronger pumps I have, moving from one area to another has been fine to let it run but I try to release the pressure relatively quickly

Surprisingly, just by securing them to each other they remain upright. I did add small wooden braces in each corner though I'm not sure if it was necessary. Also, the top plate that I laid across them helps to tie it all together too.

lol You're welcome.